The best way to avoid water damage is to prevent it. Backed by years of product development and industry leading technology, the device detects and stops leaks. From your toilet, shower or faucet, to the pipes in your foundation and behind your walls, the device monitors all of them so there’s no surprises on your water bill or catastrophes when you come home from vacation.
A leaky faucet that drips at the rate of one drip per second can waste more than 3,000 gallons per year. That’s the amount of water needed to take more than 180 showers!
Depending on the water pressure to your house, a running toilet can leak over 1 gallon of water per hour which adds up to 26 gallons per day. This is almost 1 unit of water a month and if left undiscovered, a running toilet can waste almost 13 units of water a year.
Flo by Moen- Install and Get Protected
Flo by Moen is installed on the main water supply line to the home. Because it’s installed in-line, this allows the device to monitor all water going into the home. The device has three sensors that actively monitor water flow, pressure, and temperature. These sensors, in combination with the device’s algorithms, are what enable Flo by Moen to detect and protect the home from problems like leaks, burst pipes and more!
FLO by Moen Never Sleeps
Every night, Flo by Moen runs a health test on your system. This is done to test for leaks anywhere in your home. Because the device can detect leaks as small as a drop per minute, you’d likely never know these existed until you had a problem such as water damage, mold behind walls, or even an unexplained rising water bill.
Imagine Plumbing & Appliance are factory trained experts on Flo by Moen so contact us and ask to discuss this industry leading product that will protect your home and save you money.